![]() Removing the Installed Logic Board Note: The replacement logic board does not include memory DIMMs or expansion cards. Place the bottom housing on a sturdy, flat surface and ESD mat. While depressing both levers, pull the bottom housing all the way forward and remove it from the rack. ![]() Grasp the thumbscrews and slide the bottom housing forward part way to expose the two chassis levers. Important: Always ground yourself by touching the server’s case before you touch any parts or install any components inside the server. Touch the server’s metal case to discharge any static electricity. If the cable management arm is not in use, unplug all external cables except the power cord. If the server is in the locked position (the yellow security LED on the front panel is on), use the Allen key that came with the server to unlock it. Opening the Server The server slides open from the front of the rack. Tools Required The only tool required for this procedure is a Phillips screwdriver. Note: Online instructions covering customer-installable parts are available at. ![]() Failure to follow these instructions could damage your equipment and void its warranty. Xserve Logic Board Replacement Instructions Follow the instructions in this sheet carefully.
0 Comments
Leave a Reply. |